USD
  • USD
  • JPY
My account
0Cart

H22 / H22A

The Honda H engine was Honda's high-performance "big block" engine family from the 1990s and early 2000s. It is largely derived from the Honda F engine and shares many design features. It was replaced by the Honda K engine. The primary applications of the H engine series were the fourth- and fifth-generation Honda Prelude, and the fifth- and sixth-generation Honda Accord. It has also enjoyed some success as a racing engine, forming the basis of Honda's Touring car racing engines for many years, and being installed in lightweight chassis (such as the Honda CRX) for use in drag racing. The H22A debuted in 1993 for use in the Honda Prelude VTEC as the H22A1. Versions of the H22A would be the Prelude's signature high-performance engine worldwide until the end of Prelude production in 2001. It was also used in the 1994-1997 Honda Accord SiR and 1998-2002 Honda Accord Euro-R in Japan.
<b>BC0030</b> - Honda H22 Spring/Titanium Retainer Kit

BC0030

BC0030 - Honda H22 Spring/Titanium Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1030 Dual Free Length 1.815" Seat 1.400" @ 88 lbs Open 0.950" @ 220 lbs Coil Bind 0.790" Retainer BC2010 Spring Seat OEM Net Cam Lift 0.510" / 12.95mm

$ 429.84 $ 494,316.00

<b>BC0030S</b> - Honda H22 Spring/Steel Retainer Kit

BC0030S

BC0030S - Honda H22 Spring/Steel Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1030 Dual Free Length 1.815" Seat 1.400" @ 88 lbs Open 0.950" @ 220 lbs Coil Bind 0.790" Retainer BC2011 Spring Seat OEM Net Cam Lift 0.510" / 12.95mm

$ 338.16 $ 388,884.00

<b>BC2940</b> - Honda/Acura 5.5mm Billet Keepers/Locks (fits BC2010 and BC2011)

BC2940

BC2940 - Honda/Acura 5.5mm Billet Keepers/Locks (fits BC2010 and BC2011)

5.5mm Stem, 7í«̴́ Billet Keepers/Locks set/32 - NOTE: If running late model cylinder head (K20 af...

5.5mm Stem, 7í«̴́ Billet Keepers/Locks set/32 - NOTE: If running late model cylinder head (K20 after 2004), you may need to purchase BC2940 keepers to accommodate BC2010 or BC2011 retainers.

$ 108.28 $ 124,522.00

<b>BC3030-1</b> - Individual Honda H22/H22A Intake Valves (35mm / STD) - 1 only valve

BC3030-1

BC3030-1 - Individual Honda H22/H22A Intake Valves (35mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38

<b>BC3030</b> - Individual Honda H22/H22A Intake Valves (35mm / STD) - Set/8

BC3030

BC3030 - Individual Honda H22/H22A Intake Valves (35mm / STD) - Set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00

<b>BC3031-1</b> - Individual Honda H22/H22A Exhaust Valves (30mm / STD) - 1 only valve

BC3031-1

BC3031-1 - Individual Honda H22/H22A Exhaust Valves (30mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38

<b>BC3031</b> - Honda H22/H22A Exhaust Valves (30mm / STD) - set/8

BC3031

BC3031 - Honda H22/H22A Exhaust Valves (30mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00

<b>BC3034-1</b> - Individual Honda H22/H22A Intake Valves (36mm / +1mm) - 1 only valve

BC3034-1

BC3034-1 - Individual Honda H22/H22A Intake Valves (36mm / +1mm) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38

<b>BC3034</b> - Honda H22/H22A Intake Valves (36mm / +1mm) - set/8

BC3034

BC3034 - Honda H22/H22A Intake Valves (36mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00

<b>BC3034S-8</b> - Honda H22/H22A Intake Valves (36mm / +1mm) - set/8

BC3034S-8

BC3034S-8 - Honda H22/H22A Intake Valves (36mm / +1mm) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 3...

$ 190.52 $ 219,098.00

<b>BC3035-1</b> - Individual Honda H22/H22A Exhaust Valves (31mm / +1mm) - 1 only valve

BC3035-1

BC3035-1 - Individual Honda H22/H22A Exhaust Valves (31mm / +1mm) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38

<b>BC3035</b> - Honda H22/H22A Exhaust Valves (31mm / +1mm) - set/8

BC3035

BC3035 - Honda H22/H22A Exhaust Valves (31mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00

<b>BC3035S-8</b> - Honda H22/H22A Exhaust Valves (31mm / +1mm) - set/8

BC3035S-8

BC3035S-8 - Honda H22/H22A Exhaust Valves (31mm / +1mm) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 3...

$ 190.52 $ 219,098.00

<b>BC3900-2</b> - Honda H22 Series VTEC Intake Valve Guides

BC3900-2

BC3900-2 - Honda H22 Series VTEC Intake Valve Guides

5.5mm Intake - Manganese Silicon Aluminum Bronze

5.5mm Intake - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93

<b>BC3901-2</b> - Honda H22 Series VTEC Exhuast Valve Guides

BC3901-2

BC3901-2 - Honda H22 Series VTEC Exhuast Valve Guides

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93

<b>BC3970</b> - Honda B16A/H22A 5.5mm Valve Stem Seals for Stock or Aftermarket Valve Guides

BC3970

BC3970 - Honda B16A/H22A 5.5mm Valve Stem Seals for Stock or Aftermarket Valve Guides

BC valve stem seals are designed for stock or aftermarket valve guides (BC3900/3901). These Viton...

BC valve stem seals are designed for stock or aftermarket valve guides (BC3900/3901). These Viton seals allow a carefully defined amount of engine oil from the cylinder head into the combustion chamber—to lubricate the rotating valve stem in the valve guide. BC valve stem seals are produced from high performance materials for increased part life and lower wear. Set/16

$ 33.08 $ 38.04

<b>BC3971</b> - Honda B18C 5.5mm Valve Stem Seals for Stock or Aftermarket Valve Guides

BC3971

BC3971 - Honda B18C 5.5mm Valve Stem Seals for Stock or Aftermarket Valve Guides

BC valve stem seals are designed for stock or aftermarket valve guides (BC3900/3901). These Viton...

BC valve stem seals are designed for stock or aftermarket valve guides (BC3900/3901). These Viton seals allow a carefully defined amount of engine oil from the cylinder head into the combustion chamber—to lubricate the rotating valve stem in the valve guide. BC valve stem seals are produced from high performance materials for increased part life and lower wear. Set/16

$ 33.08 $ 38.04