USD
  • USD
  • JPY

6G72


AR8613

AR8613 - Mitsubishi/DSM 6G72 ARP Head Studs

Mitsubishi/DSM 6G72 ARP Head Studs - ARP #207-4205 - 8740 Alloy Heat Treated to 200,000 p.s.i.

Mitsubishi/DSM 6G72 ARP Head Studs - ARP #207-4205 - 8740 Alloy Heat Treated to 200,000 p.s.i.

$ 502.35 $ 592.77


AR8713

AR8713 - Mitsubishi 6G72 ARP Main Studs

Mitsubishi 6G72 ARP Main Studs - ARP #207-5801 - 8740 Alloy Heat Treated to 200,000 p.s.i.

Mitsubishi 6G72 ARP Main Studs - ARP #207-5801 - 8740 Alloy Heat Treated to 200,000 p.s.i.

$ 208.18 $ 245.65


BC0140

BC0140 - Mitsubishi 6G72 Spring/Titanium Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1140 Single Free Length 1.796" Seat 1.460" @ 84 lbs Open 1.000" @ 235 lbs Coil Bind 0.935" Retainer BC2100-24 Spring Seat OEM Net Cam Lift 0.450" / 11.43mm

$ 394.35 $ 465.33


BC0141

BC0141 - Mitsubishi 6G72/VR-4 Stage 2+ Camshafts - Street/Strip Spec

Map tuning necessary. Short duration for nice street manners, slight lope at idle. OK to use with...

Map tuning necessary. Short duration for nice street manners, slight lope at idle. OK to use with OEM valve springs or BC0140. Adv Dur 266°/272° Dur @ .050 204°/212° Valve Lift (1.7:1) .401"/.381" Valve Lift (mm) 10.18/09.66

$ 976.64 $ 1,152.44


BC0148

BC0148 - Mitsubishi 6G72/VR-4 Stroker Kit - 84mm Stroke/ProH625+ Rods

3.4L - Includes 4340 billet crank, 84mm stroke, ProH625+ rods (5.548 c-to-c), and custom pistons ...

3.4L - Includes 4340 billet crank, 84mm stroke, ProH625+ rods (5.548 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Crank # BC5149 - 84mm Rod # BC6148 - 5.548" Piston # BC7149 - Custom

$ 6,268.46 $ 7,396.78


BC0149

BC0149 - Mitsubishi 6G72/VR-4 Stroker Kit - 84mm Stroke/ProH2K Rods

3.4L - Includes 4340 billet crank, 84mm stroke, ProH2K rods (5.548 c-to-c), and custom pistons (c...

3.4L - Includes 4340 billet crank, 84mm stroke, ProH2K rods (5.548 c-to-c), and custom pistons (choice of bore/compression). ACL Race bearings available separately. Crank # BC5149 - 84mm Rod # BC6149 - 5.548" Piston # BC7149 - Custom

$ 5,893.83 $ 6,954.72


BC2948

BC2948 - Mitsubishi 6G72 Billet Keepers/Locks (fits BC2140)

6° Billet Keepers / Locks for Mitsubishi 6G72 applications (set/48)

6° Billet Keepers / Locks for Mitsubishi 6G72 applications (set/48)

$ 150.17 $ 177.20


BC3140

BC3140 - Mitsubishi 6G72 Intake Valves (35mm / STD) - set/12

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 239.68 $ 282.82


BC3141

BC3141 - Mitsubishi 6G72 Exhaust Valves (30.5mm / STD) - set/12

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 239.68 $ 282.82


BC3918

BC3918 - Mitsubishi 3000GT (6G72)/Dodge Stealth Intake Valve Guides

6.0mm Intake - Manganese Silicon Aluminum Bronze

6.0mm Intake - Manganese Silicon Aluminum Bronze

$ 109.95 $ 129.74


BC3919

BC3919 - Mitsubishi 3000GT (6G72)/Dodge Stealth Exhaust Valve Guides

6.0mm Exhaust - Manganese Silicon Aluminum Bronze

6.0mm Exhaust - Manganese Silicon Aluminum Bronze

$ 109.95 $ 129.74


BC5149

BC5149 - Mitsubishi 6G72 (VR-4) Crankshaft - 4340 Billet - 84mm Stroke, Self Balance

4340 billet, unbalanced. All cranks are stress relieved, shot peened, magna flux inspected and ni...

4340 billet, unbalanced. All cranks are stress relieved, shot peened, magna flux inspected and nitrided (multi step heat treatment) for ultimate performance. Fully profiled counterweights are designed for reduced windage through the crankcase creating less oil resistance for better rpm potential. Stroke 84mm Rod Journal 50mm Main Journal 60mm Weight 37.6 Lbs

$ 4,251.10 $ 5,016.30


BC6148

BC6148 - Mitsubishi 6G72 - ProH625+ Connecting Rods w/ Custom Age Fasteners

Mitsubishi 6G72 - ProH625+ w/ Custom Age Fasteners. Made from aerospace grade, 4340 chromoly stee...

Mitsubishi 6G72 - ProH625+ w/ Custom Age Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required to turn up the boost, the nitrous and/or the RPM range. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.548" BE Bore 2.086" BE Width 0.820" PE Bore 0.866" PE Width 0.822" Gram Wt 532 Torque Sp...

$ 1,145.28 $ 1,351.43


BC6149

BC6149 - Mitsubishi 6G72 - ProH2K Connecting Rods w/ ARP2000 Fasteners

Mitsubishi 6G72 - ProH2K (formerly Sportsman) w/ ARP2000 Fasteners. Made from aerospace grade, 43...

Mitsubishi 6G72 - ProH2K (formerly Sportsman) w/ ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required to turn up the boost, the nitrous and/or the RPM range. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.548" BE Bore 2.086" BE Width 0.820" PE Bore 0.866" PE Width 0.822" Gram Wt...

$ 731.22 $ 862.84