USD
  • USD
  • JPY

Honda Talon


AR8697

AR8697 - Honda Talon 1000 ARP2000 Head Stud Kit

Made from ARP2000 material and rated to 220,000 psi, ARP cylinder head studs not only offer super...

Made from ARP2000 material and rated to 220,000 psi, ARP cylinder head studs not only offer superior clamp loads over cylinder head bolts, they provide proper alignment of the head and gasket with more accurate and consistent torque loading. Bolts will actually twist while torquing to proper spec, greatly reducing their ability to hold true.

$ 190.00 $ 218.50


BC0920S

BC0920S - Honda Talon (19-up) Spring/Steel Retainer/Seat Kit

Drop-in install, no machine work. Designed for high rpm, BC valve springs by PAC Racing are wound...

Drop-in install, no machine work. Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC retainers are machined from premium 4140 chromoly alloy for added reliability for high endurance use.  Type BC1920 Single Free Length 1.785" Seat 1.450" @ 75 lbs Open 1.115" @ 163 lbs Coil Bind 0.950" Retainer BC2920S Spring Seat Stock Net Cam...

$ 170.00 $ 195.50


BC0921

BC0921 - Honda Talon (19-up) Stage 2 Stock Replacement Trail Cam

New cams...not regrinds! Drop-in spec, that works with factory valve springs. Perfect for mild tr...

New cams...not regrinds! Drop-in spec, that works with factory valve springs. Perfect for mild trail riding, delivers excellent throttle response without requiring tuning. Adv Dur (.006") 266°/260° Dur @ .050 238°/230° Valve Lift (1:1) .395"/.375" Valve Lift (mm) 10.03/9.53

$ 360.00 $ 414.00


BC0922

BC0922 - Honda Talon (19-up) Stage 3 High Performance Trail Cam

New cams...not regrinds! Hardcore aggressive trail riding with minimal mods + tune for good gains...

New cams...not regrinds! Hardcore aggressive trail riding with minimal mods + tune for good gains in the mid-range. For trails, delivers excellent throttle response out of the turns and thru the wash, still pulls hard on the top end.  Adv Dur (.006") 272°/270° Dur @ .050 242°/236° Valve Lift (1:1) .410"/.390" Valve Lift (mm) 10.42/9.90

$ 360.00 $ 414.00


BC0923

BC0923 - Honda Talon (19-up) Stage 4 Full Race Spec

New cams...not regrinds! Designed for the BC CNC ported head with +1mm intake and exhaust valves,...

New cams...not regrinds! Designed for the BC CNC ported head with +1mm intake and exhaust valves, high compression pistons (12:1 or higher), extensive tuning, focus on top end power. Requires BC0920. Adv Dur (.006") 280°/276° Dur @ .050 252°/236° Valve Lift (1:1) .420"/.390" Valve Lift (mm) 10.42/9.90

$ 360.00 $ 414.00


BC0924

BC0924 - Honda Talon (19-up) Stage 3 Turbo Spec

New cams...not regrinds! Short duration and more lift to build more cylinder pressure for turboch...

New cams...not regrinds! Short duration and more lift to build more cylinder pressure for turbocharged applications, tuning and ECU mods recommended. Requires kit BC0920. Adv Dur (.006") 264°/270° Dur @ .050 240°/230° Valve Lift (1:1) .420"/.402" Valve Lift (mm) 10.67/10.21

$ 360.00 $ 414.00


BC3820

BC3820 - Honda Talon 1000 Stainless Steel Intake Valves - 36.5mm (STD)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 80.00 $ 92.00


BC3821

BC3821 - Honda Talon 1000 Inconel Exhaust Valves - 31.0mm (STD)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant Inconel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under ...

$ 120.00 $ 138.00


BC3822

BC3822 - Honda Talon 1000 Stainless Steel Intake Valves - 37.5mm (+1mm)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 80.00 $ 92.00


BC3823

BC3823 - Honda Talon 1000 Inconel Exhaust Valves - 32.0mm (+1mm)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant Inconel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under ...

$ 120.00 $ 138.00


BC3892

BC3892 - Honda Talon 1000 (19-up) Valve Lash Adjusters

BC valve lash adjusters are CNC machined from S7 tool steel for the ultimate in wear resistance. ...

BC valve lash adjusters are CNC machined from S7 tool steel for the ultimate in wear resistance. Each shim kit includes 36 pieces from in nine varying thicknesses starting at 2.00mm thick all the way up to 2.40mm thick in 0.05mm increments. 4 shims in each thickness.

$ 105.00 $ 120.75


BC6921

BC6921 - Honda Talon (19-up) ProH2K Connecting Rods w/ARP2000 Fasteners

Honda Talon - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high...

Honda Talon - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required for high rpm applications. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.084" BE Bore 1.8504" BE Width 0.903" PE Bore 0.866" PE Width 0.903" Gram Wt 545 Torque Specs 50-55 ft lbs - 3/8"

$ 487.00 $ 560.05


BC6922

BC6922 - Honda Talon (19-up) Pro625+ Connecting Rods w/ARP625+ Fasteners

Honda Talon - Pro625+ w/ARP Custom Age 625+ Fasteners. Made from aerospace grade, 4340 chromoly s...

Honda Talon - Pro625+ w/ARP Custom Age 625+ Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required for high rpm applications. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.084" BE Bore 1.8504" BE Width 0.903" PE Bore 0.866" PE Width 0.903" Gram Wt 541 Torque Specs 65-70 ft lbs - 3/8"

$ 530.00 $ 609.50


BC7921

BC7921 - Honda Talon 1000 (19-up) CP Custom Pistons w/All Hardware - Specify Bore x Compre...

Order your custom JE pistons from Brian Crower in any bore and compression ratio as well as add f...

Order your custom JE pistons from Brian Crower in any bore and compression ratio as well as add features like skirt and top coatings, upgraded 9310 alloy wrist pins, gas ports, etc...50% deposit required, allow 4-6 weeks for delivery.

$ 650.00 $ 747.50


BC8292-1

BC8292-1 - Honda Talon 1000 (92-93mm x .023”) Cometic Head Gasket

92-93mm cyl bore, .023” Thickness - Cometic three layer gaskets combine advanced materials with s...

92-93mm cyl bore, .023” Thickness - Cometic three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The MLS head gasket is comprised of a three layer setup - Viton coated embossed spring steel outer layers surround a steel inner layer that provides support and thickness to the gasket. Embossments on the gasket allow for a proper seal around oil and water passages.

$ 90.00 $ 103.50


BC8292-2

BC8292-2 - Honda Talon 1000 (92-93mm x .052”) Cometic Head Gasket

92-93mm cyl bore, .052” Thickness - Cometic three layer gaskets combine advanced materials with s...

92-93mm cyl bore, .052” Thickness - Cometic three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The MLS head gasket is comprised of a three layer setup - Viton coated embossed spring steel outer layers surround a steel inner layer that provides support and thickness to the gasket. Embossments on the gasket allow for a proper seal around oil and water passages.

$ 90.00 $ 103.50


BC9020-2

BC9020-2 - ARP Honda Talon 2-Seat (19-up) ARP Roll Cage Kit

BC x ARP exclusive roll cage bolt kit for the Honda Talon 2 seater. Features 12pt, polished stain...

BC x ARP exclusive roll cage bolt kit for the Honda Talon 2 seater. Features 12pt, polished stainless steel bolts rated to 180,000psi, far superior to the Grade 8 stock bolts and a way better look. Fits Honda Talon 2 seaters. 4 seat version in development.

$ 75.00 $ 86.25


BC9024

BC9024 - ARP Honda Talon Wheel Stud Kit (set/4)

Exclusive @arpbolts SxS wheel studs deliver the strength and performance required for extreme of...

Exclusive @arpbolts SxS wheel studs deliver the strength and performance required for extreme off-road use, whether it’s the dunes, trails, rocks or the race track. Made from heat-treated 8740 chromoly with cadmium plating for added corrosion resistance, ARP studs deliver 200,000psi tensile strength vs 150,000psi on the factory Grade 8 studs. ARP studs are designed with added shoulder length for proper wheel engagement, an oversize splined grip that keeps the stud secure on the hub and a pro...

$ 35.00 $ 40.25


BC9920

BC9920 - Honda Talon 1000 CNC Cylinder Head - Small Port 36.5mm/31mm Valves

Use pulldowns above to build out your head. The BC core exchange program works three ways: 1) Bu...

Use pulldowns above to build out your head. The BC core exchange program works three ways: 1) Buy one of BC's new heads outright, no exchange. 2) Send a new head in for even exchange for one of BC's new in-stock heads. Check with BC for availability. 3) Send a used head in, receive that same head back + $150 for complete inspection prior to machine work. BC only accepts new, never-been ran Honda heads (#12010-HL6-A00) cylinder heads as new core exchanges. BC uses only new heads for all new e...

$ 1,102.00 $ 1,267.30


BC9921

BC9921 - Honda Talon 1000 CNC Cylinder Head - Big Port 37.5mm/32mm Valves

Use pulldowns above to build out your head. The BC core exchange program works three ways: 1) Bu...

Use pulldowns above to build out your head. The BC core exchange program works three ways: 1) Buy one of BC's new heads outright, no exchange. 2) Send a new head in for even exchange for one of BC's new in-stock heads. Check with BC for availability. 3) Send a used head in, receive that same head back + $150 for complete inspection prior to machine work. BC only accepts new, never-been ran Honda heads (#12010-HL6-A00) cylinder heads as new core exchanges. BC uses only new heads for all new e...

$ 1,102.00 $ 1,267.30


CA6922

CA6922 - Honda Talon 1000 (19-up) Carrillo Straight-H Beam Connecting Rods w/CARR Bolts

Honda Talon - Carrillo Connecting rods were founded by Fred Carrillo in 1963. Fred approached the...

Honda Talon - Carrillo Connecting rods were founded by Fred Carrillo in 1963. Fred approached the challenges of manufacturing with the idea of no compromise. He knew the never ending quest for speed would require the same desire in component manufacturing. This Carrillo philosophy is as evident today as it was at Carrillo’s conception in 1963. Quality and pride go hand-in-hand at CP-Carrillo. Manufacturing a CP-Carrillo rod is much more than cutting a forging, meeting production goals and shi...

$ 800.00 $ 920.00


CP2090

CP2090 - Honda Talon 1000 (19-up) CP Shelf Pistons w/All Hardware - 92mm x 9.5:1

Pistons are the backbone of any true hardcore racing engine and that’s where CP-Carrillo excels. ...

Pistons are the backbone of any true hardcore racing engine and that’s where CP-Carrillo excels. Our Engineering department started off analyzing the competition, gathering industry data and deciding to make the highest level of pistons, period. The heart and soul of our pistons are built through our Engineering Department and its resources. This department is made up of several factors that push them ahead of the competition; Reverse Engineering, Design Experience and Flexibility, Analysis a...

$ 560.00 $ 644.00


CP2091

CP2091 - Honda Talon 1000 (19-up) CP Shelf Pistons w/All Hardware - 92mm x 10.5:1

Pistons are the backbone of any true hardcore racing engine and that’s where CP-Carrillo excels. ...

Pistons are the backbone of any true hardcore racing engine and that’s where CP-Carrillo excels. Our Engineering department started off analyzing the competition, gathering industry data and deciding to make the highest level of pistons, period. The heart and soul of our pistons are built through our Engineering Department and its resources. This department is made up of several factors that push them ahead of the competition; Reverse Engineering, Design Experience and Flexibility, Analysis a...

$ 560.00 $ 644.00


CP2092

CP2092 - Honda Talon 1000 (19-up) CP Shelf Pistons w/All Hardware - 92mm x 11.5:1

Pistons are the backbone of any true hardcore racing engine and that’s where CP-Carrillo excels. ...

Pistons are the backbone of any true hardcore racing engine and that’s where CP-Carrillo excels. Our Engineering department started off analyzing the competition, gathering industry data and deciding to make the highest level of pistons, period. The heart and soul of our pistons are built through our Engineering Department and its resources. This department is made up of several factors that push them ahead of the competition; Reverse Engineering, Design Experience and Flexibility, Analysis a...

$ 560.00 $ 644.00