USD
  • USD
  • JPY

H22 / H22A

The Honda H engine was Honda's high-performance "big block" engine family from the 1990s and early 2000s. It is largely derived from the Honda F engine and shares many design features. It was replaced by the Honda K engine. The primary applications of the H engine series were the fourth- and fifth-generation Honda Prelude, and the fifth- and sixth-generation Honda Accord. It has also enjoyed some success as a racing engine, forming the basis of Honda's Touring car racing engines for many years, and being installed in lightweight chassis (such as the Honda CRX) for use in drag racing. The H22A debuted in 1993 for use in the Honda Prelude VTEC as the H22A1. Versions of the H22A would be the Prelude's signature high-performance engine worldwide until the end of Prelude production in 2001. It was also used in the 1994-1997 Honda Accord SiR and 1998-2002 Honda Accord Euro-R in Japan.

BC3030

BC3030 - Honda H22/H22A Intake Valves (35mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 159.79 $ 188.55


BC3030S-8

BC3030S-8 - Honda H22/H22A Intake Valves (35mm / STD) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 3...

$ 100.00 $ 188.55


BC3031

BC3031 - Honda H22/H22A Exhaust Valves (30mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 159.79 $ 188.55


BC3031S-8

BC3031S-8 - Honda H22/H22A Exhaust Valves (30mm / STD) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 3...

$ 100.00 $ 188.55


BC3034

BC3034 - Honda H22/H22A Intake Valves (36mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 159.79 $ 188.55


BC3034S-8

BC3034S-8 - Honda H22/H22A Intake Valves (36mm / +1mm) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 3...

$ 100.00 $ 188.55


BC3035

BC3035 - Honda H22/H22A Exhaust Valves (31mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 159.79 $ 188.55


BC3035S-8

BC3035S-8 - Honda H22/H22A Exhaust Valves (31mm / +1mm) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 3...

$ 100.00 $ 188.55