USD
  • USD
  • JPY

Yamaha YXZ


BC0950

BC0950 - Yamaha 998 Dual Spring/Steel Retainer/Seat Kit

Kit is intended for OEM shim in retainer setup. Designed for high rpm, BC valve springs by PAC Ra...

Kit is intended for OEM shim in retainer setup. Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC retainers are machined from premium 6AL4V titanium alloy for added valve control above 10,000 rpm. Type BC1950 Dual Free Length 1.572" Outer/1.339" Inner Seat 1.265" @ 76 lbs Open 0.850" @ 192 lbs Coil Bind 0.715" Retainer BC2905H ...

$ 325.00 $ 373.75


BC0950B

BC0950B - Yamaha 998 Dual Spring/Steel Retainer/Seat Kit

Kit is intended for shim in aftermarket bucket setup. Designed for high rpm, BC valve springs by ...

Kit is intended for shim in aftermarket bucket setup. Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC retainers are machined from premium 6AL4V titanium alloy for added valve control above 10,000 rpm. Type BC1950 Dual Free Length 1.572" Outer/1.339" Inner Seat 1.265" @ 76 lbs Open 0.850" @ 192 lbs Coil Bind 0.715" Retainer BC29...

$ 325.00 $ 373.75


BC3850

BC3850 - Yamaha YXZ / Textron XX Stainless Steel Intake Valves - 31mm (STD)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 99.00 $ 113.85


BC3851

BC3851N - Yamaha YXZ / Textron XX Inconel Exhaust Valves - 26mm (STD)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, extreme heat resistant Inconel NCF751 alloy or Inconel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and feature...

$ 99.00 $ 113.85


BC3853-N

BC3853N - Yamaha YXZ / Textron XX Inconel Exhaust Valves - 27mm (STD)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, extreme heat resistant Inconel NCF751 alloy or Inconel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and feature...

$ 99.00 $ 113.85


BC3995

BC3995 - Yamaha YXZ / 998 Valve Stem Seals for Stock or Aftermarket Valve Guides

BC valve stem seals are designed for stock or aftermarket valve guides (BC3967). These Viton seal...

BC valve stem seals are designed for stock or aftermarket valve guides (BC3967). These Viton seals allow a carefully defined amount of engine oil from the cylinder head into the combustion chamber—to lubricate the rotating valve stem in the valve guide. BC valve stem seals are produced from high performance materials for increased part life and lower wear. Set/12

$ 66.00 $ 75.90


BC8885DLC

BC8885DLC - Yamaha YXZ (16-up) Cam Bucket Followers w/DLC Coating

Due to the notorious bucket wear issues on the YXZ, BC only offers shim in buckets with DLC coati...

Due to the notorious bucket wear issues on the YXZ, BC only offers shim in buckets with DLC coating. Requires BC spring/retainer kit BC0950B in order to use. Made from aerospace grade, 4140 chromoly steel alloy and completely CNC machined from heat-treated billet round bar. Heavy-duty wall thickness eliminates distortion and cam face depression, while reducing overall weight from non-critical stress areas. Nitrided and polished to a surface hardness of 60RC for minimal wear. Provides lower fr...

$ 500.00 $ 575.00


BC9990

BC9990 - SxS Valve Spring Compressor/Installation Tool

The BC valve spring compressor and installation tool for the Polaris RZR, Can-Am X3 and Yamaha YX...

The BC valve spring compressor and installation tool for the Polaris RZR, Can-Am X3 and Yamaha YXZ allows quick and easy assembly of a complete SxS cylinder head in minitues. Even works while the head is installed on the engine in the car using compressed air through the spark plug hole. Install valve springs, retainers, valves and keepers fast and efficiently. Includes the following: Base housing that threads into spark plug hole. Pivoting arm to install 4 valves per hole.    3 spring/retai...

$ 250.00 $ 287.50