USD
  • USD
  • JPY

UTV


BC0900

BC0900 - Polaris XP1000 (14-up) Beehive Spring/Titanium Retainer Kit

Set/8 - Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest gra...

Set/8 - Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy (ASTM A877A - CSV)and feature proprietary processing procedures for consistent pressures. BC titanium retainers are CNC machined from aerospace grade 6AL4V billet material to exacting tolerances. Titanium offers additional valve control at extensive rpm's. Contrary to internet chatter, titanium retainers are perfectly fine to run on a single, beehive valve sp...

$ 290.00 $ 342.20


BC0900S

BC0900S - Polaris XP1000 (14-up) Beehive Spring/Steel Retainer Kit

Set/8 - Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest gra...

Set/8 - Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy (ASTM A877A - CSV)and feature proprietary processing procedures for consistent pressures. BC steel retainers are CNC machined from aerospace grade, hardened 4140 round bar chromoly steel to exacting tolerances. Steel retainers are recommended if very high miles (excess of 10k per year). Type BC1901 Beehive Free Length 1.610" Seat 1.350" @ 65 lbs Open...

$ 236.00 $ 278.48


BC0901

BC0901 - Polaris XP1000 Non Turbo (2014-up) Stage 2 Camshafts (Set/2)

Ground on runBC’s exclusive semi core, which allows for any spec without reducing base circle siz...

Ground on runBC’s exclusive semi core, which allows for any spec without reducing base circle size. No more valve re-shimming or expensive bucket conversions required. These are straight DROP IN CAMS! Stage 2 spec good for all purpose use, works with stock valve springs. These cams will power you out of the turn or berm. Use in conjunction with BC spring/retainer kit (BC0900 or BC0900S) if exceeding factory rev limit. Price for the pair Set/2 Adv Dur 266°/264° Dur @ .050 234°/232° Valv...

$ 800.00 $ 941.00


BC1901

BC1901 - Polaris XP1000 (14-up) Beehive Valve Spring

Set/8 - Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest gra...

Set/8 - Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type Beehive Free Length 1.610" Seat 1.350" @ 65 lbs Open 0.850" @ 190 lbs Coil Bind 0.770" Retainer BC2901, BC2901S Spring Seat BC2911 Net Cam Lift 0.500" / 12.70mm

$ 190.00 $ 224.20


BC2901

BC2901 - Polaris XP1000 (14-up) Titanium Retainers - Limited Mileage

Set/8 - BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting toleranc...

Set/8 - BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. Contrary to internet chatter, titanium retainers are perfectly fine to run on a single, beehive valve spring. There is no wear issues when used in conjunction with a single spring. Dual spring setups with high mileage are the issue with titanium. Stem 5.5mm O.D. 0.815" Step 1 0.503" Step 2 N/A Inst Ht Stock Gram Wt 4.0

$ 100.00 $ 118.00


BC2901S

BC2901S - Polaris XP1000 (14-up) - Steel Retainers

Set/8 - BC steel retainers are CNC machined from hardened 4140 round bar chromoly to exacting tol...

Set/8 - BC steel retainers are CNC machined from hardened 4140 round bar chromoly to exacting tolerances. Stem 5.5mm O.D. 0.815" Step 1 0.503" Step 2 N/A Inst Ht Stock Gram Wt 7.0

$ 46.00 $ 54.28


BC2911

BC2911 - Polaris XP1000 (14-up) - Steel Spring Seat

Set/8 - BC steel spring seats are CNC machined from hardened 4140 round bar chromoly steel to exa...

Set/8 - BC steel spring seats are CNC machined from hardened 4140 round bar chromoly steel to exacting tolerances. Spring # BC1901 O.D. 1.050" Step 1 0.734" Step 2 N/A Gram Wt 8.0

$ 30.00 $ 35.40


BC2991

BC2991 - Polaris XP1000 (14-up) Billet Keepers/Locks (fits BC2901 & BC2901S)

Set/8 Pair - Billet valve keepers/locks designed to work in conjunction with BC titanium and/or s...

Set/8 Pair - Billet valve keepers/locks designed to work in conjunction with BC titanium and/or steel retainers.

$ 60.00 $ 70.80


BC3701

BC3701 - Polaris XP1000 (14-up) - Stainless Steel Exhaust Valves (+1mm Dia)

Set/4 - BC valves are one piece design with a friction welded Stellite tip for the best possible ...

Set/4 - BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polish...

$ 105.00 $ 123.90


BC6901

BC6901 - Polaris XP1000 (14-up) - ProH2K Connecting Rods w/ARP2000 Fasteners - 4.921"

Polaris XP1000 - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC h...

Polaris XP1000 - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required to turn up the boost, the nitrous and/or the RPM range. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. Set/2 C-to-C 4.921" / 125.00mm BE Bore 1.7323" / 44.00mm BE Width 0.955" PE Bore 0.787" / 20.00mm PE Width 0...

$ 400.00 $ 472.00


BC6951

BC6951 - Yamaha YXZ1000R - ProH2K Connecting Rods w/ARP2000 Fasteners - 4.665"

Yamaha YXZ - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high ...

Yamaha YXZ - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required to turn up the boost, the nitrous and/or the RPM range. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 4.665" / 118.50mm BE Bore 1.6142" / 41.00mm BE Width 0.887" PE Bore 0.748" / 19.00mm PE Width 0.800" Gr...

$ 600.00 $ 708.00


AR8690

AR8690 - Polaris XP1000 (14-up) ARP Head Studs (#288-4701)

Polaris XP1000 (14-up) ARP Head Studs - ARP #288-4701 - 8740 Alloy Heat Treated to 200,000 p.s.i.

Polaris XP1000 (14-up) ARP Head Studs - ARP #288-4701 - 8740 Alloy Heat Treated to 200,000 p.s.i.

$ 145.00 $ 160.00


AR8790

AR8790 - Polaris XP1000 (14-up) ARP Main Studs (#188-5401)

Polaris XP1000 (14-up) ARP Main Studs - ARP #188-5401 - 8740 Alloy Heat Treated to 200,000 p.s.i.

Polaris XP1000 (14-up) ARP Main Studs - ARP #188-5401 - 8740 Alloy Heat Treated to 200,000 p.s.i.

$ 155.00 $ 170.00


BC3700

BC3700 - Polaris XP1000 (14-up) - Stainless Steel Intake Valves (+1mm Dia)

Set/4 - BC valves are one piece design with a friction welded Stellite tip for the best possible ...

Set/4 - BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polish...

$ 105.00 $ 123.90


BC8880

BC8880 - Polaris XP1000 (14-up) - Camshaft Followers

Set/8 - Completely CNC machined from Aerospace certified Chrome-Molybdenum-Vanadium alloy from Au...

Set/8 - Completely CNC machined from Aerospace certified Chrome-Molybdenum-Vanadium alloy from Austria. This is a much stronger material than the alloys used in OEM extruded lifters. The lifters are fully Nitrided and polished to harden the surface to about 60Rc for low wear. Higher cam lifts and rpms will submit conventional lifters to be susceptible to increased wear. Surface is carefully finished by grinding it to a much lower surface roughness for lower friction with the cams and cylinder...

$ 210.00 $ 250.00


BC3990

BC3990 - Polaris XP1000 (14-up) - Valve Stem Seals

Set/8 - BC valve seals are made of rubber compound material for intake application and special hi...

Set/8 - BC valve seals are made of rubber compound material for intake application and special hi-temp compound for exhaust application. What makes valve stem seals different than almost every other type of seal? The answer is simple – they are designed to leak. Seals designed to leak may sound counter-intuitive, but the amount and way in which they leak is precisely controlled to achieve a specific goal.

$ 20.00 $ 23.55


BC3965

BC3965 - Polaris XP1000 (14-up) - Valve Guides

Set/8 - BC high quality copper-bronze blended alloy valve guide is developed with proprietary hea...

Set/8 - BC high quality copper-bronze blended alloy valve guide is developed with proprietary heat treatment processes allowing for greater heat dissipation, heat resistance, and lubricity properties for the next generation of high performance race engines.

$ 75.00 $ 88.23


BC0902

BC0902 - Polaris XP1000 Non Turbo (2014-up) Stage 3 Camshafts (Set/2)

Ground on runBC’s exclusive semi core, which allows for any spec without reducing base circle siz...

Ground on runBC’s exclusive semi core, which allows for any spec without reducing base circle size. These are not regrinds...so more re-shimming valves or expensive bucket conversions required. The BC Stage 3 spec are like no other cams on the market because these are not hardwelds that fail. These are new cores ground with bucket blaster profiles, designed for top end power and to pull away from the competition. Must use BC spring/retainer kit (BC0900 or BC0900S) due to increased lift. Price...

$ 1,200.00 $ 1,412.00