USD
  • USD
  • JPY

Polaris XP 1000


AR8690

AR8690 - Polaris XP Turbo (16-up) / XP 1000 (14-up) ARP2000 Head Stud Kit

Made from ARP2000 material and rated to 220,000 psi, ARP cylinder head studs not only offer super...

Made from ARP2000 material and rated to 220,000 psi, ARP cylinder head studs not only offer superior clamp loads over cylinder head bolts, they provide proper alignment of the head and gasket with more accurate and consistent torque loading. Bolts will actually twist while torquing to proper spec, greatly reducing their ability to hold true.

$ 168.00 $ 193.20


AR8691

AR8691 - Polaris XP Turbo (16-up) / XP 1000 (14-up) ARP CustomAge625+ Head Stud Kit

Made from ARP625+ Custom Age material and rated to 280,000 psi, ARP cylinder head studs not only ...

Made from ARP625+ Custom Age material and rated to 280,000 psi, ARP cylinder head studs not only offer superior clamp loads over cylinder head bolts, they provide proper alignment of the head and gasket with more accurate and consistent torque loading. Bolts will actually twist while torquing to proper spec, greatly reducing their ability to hold true.

$ 342.45 $ 393.82


AR8790

AR8790 - Polaris XP Turbo (16-up) / XP 1000 (14-up) ARP Case Stud Kit

***NOTE: Must have linebored main journals and oversize King main bearings (BC4900) to use these ...

***NOTE: Must have linebored main journals and oversize King main bearings (BC4900) to use these case studs otherwise housing bore distortion will occur and crankshaft will not rotate.*** If using on a stock RZR crankcase, recommend AR8791 case bolts. Made from ARP2000 material and rated to 220,000 psi, ARP case stud kits not only offer superior clamp loads over stock, torque to yield case bolts, they provide proper alignment of the both case halves with more accurate and consistent torque lo...

$ 178.92 $ 205,758.00


AR8791

AR8791 - Polaris XP Turbo (16-up) / XP 1000 (14-up) ARP Stock Replacement Case Bolt Kit

Stock replacement case bolts (not studs), re-useable, no more torque to yield and throw in the t...

Stock replacement case bolts (not studs), re-useable, no more torque to yield and throw in the trash. Made from ARP2000 material and rated to 220,000 psi, ARP crankcase bolts offer superior clamp loads over stock without distorting main journals. Also includes 8mm perimeter bolts and washers. Fits all 2cyl XP engines including XPTurbo, XP1000, Turbo-S, XP900, ProXP, RS1, Turbo R and all Rangers and Generals. 

$ 149.99 $ 172.49


BC8290-1

BC8290-1 - Polaris XP Turbo / XP 1000 (93/94mm x .028”) Cometic MLX Head Gasket

MLX design for non O-ringed cylinder jug fits 93mm or 94mm bore, .028” Thickness - Cometic three ...

MLX design for non O-ringed cylinder jug fits 93mm or 94mm bore, .028” Thickness - Cometic three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The MLX head gasket is comprised of a three layer setup - Viton coated embossed spring steel outer layers surround a steel inner layer that provides support and thickness to the gasket. Embossments on the gasket allow for a pr...

$ 65.00 $ 74.75


BC8290-2

BC8290-2 - Polaris XP Turbo / XP 1000 (93/94mm x .052”) Cometic MLX Head Gasket

MLX design for non O-ringed cylinder jug fits 93mm or 94mm bore, .052” Thickness - Cometic three ...

MLX design for non O-ringed cylinder jug fits 93mm or 94mm bore, .052” Thickness - Cometic three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The MLX head gasket is comprised of a three layer setup - Viton coated embossed spring steel outer layers surround a steel inner layer that provides support and thickness to the gasket. Embossments on the gasket allow for a pr...

$ 65.00 $ 74.75


BC8291-2

BC8291-2 - Polaris XP Turbo / XP 1000 (98mm x .052”) Cometic MLS Head Gasket

MLS for O-ring cylinder jug, 98mm Spread Bore, .052” Thickness - Cometic three layer gaskets comb...

MLS for O-ring cylinder jug, 98mm Spread Bore, .052” Thickness - Cometic three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The MLS head gasket is comprised of a three layer setup - Viton coated embossed spring steel outer layers surround a steel inner layer that provides support and thickness to the gasket. Embossments on the gasket allow for a proper seal around o...

$ 65.00 $ 74.75


BC8291-3

BC8291-3 - Polaris XP Turbo / XP 1000 (93mm x .051”) Cometic MLS Head Gasket

MLS for O-ring cylinder jug, 93mm Bore only, .051” Thickness - Cometic three layer gaskets combin...

MLS for O-ring cylinder jug, 93mm Bore only, .051” Thickness - Cometic three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The MLS head gasket is comprised of a three layer setup - Viton coated embossed spring steel outer layers surround a steel inner layer that provides support and thickness to the gasket. Embossments on the gasket allow for a proper seal around oil...

$ 65.00 $ 74.75


BC8291-5

BC8291-5 - Polaris XP Turbo / XP 1000 MLS for O-Ring Cylinder Jug & 1/2" Dowels (93/94mm x...

MLS design fits 93mm or 94mm bore, .036” Thickness - Cometic MLS design gasket for use on BC O-ri...

MLS design fits 93mm or 94mm bore, .036” Thickness - Cometic MLS design gasket for use on BC O-ring cylinder jugs. Also features .504" ID alignment holes for BC's dowel pinned cylinders. Three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The Multi-Layer Steel gaskets are comprised of multiple embossed layers of both proprietary high temperature coated and uncoated s...

$ 80.00 $ 92.00


BC9000-2

BC9000-2 - Polaris RZR ARP Roll Cage Bolts - 2 Seat

Exclusive ARP roll cage bolt kit for the Polaris RZR 2 seater. Features 12pt, polished stainless...

Exclusive ARP roll cage bolt kit for the Polaris RZR 2 seater. Features 12pt, polished stainless steel bolts rated to 190,000psi, far superior to the Grade 8 stock bolts (150,000psi) and a way better look. Fits all Polaris RZR 2 seaters incl XP1000, XP Turbo and Turbo-S (except ProXP).

$ 75.00 $ 86.25


BC9000-4

BC9000-4 - Polaris RZR ARP Roll Cage Bolt kit - 4 Seat

Exclusive ARP roll cage bolt kit for the Polaris RZR 4 seater. Features 12pt, polished stainless...

Exclusive ARP roll cage bolt kit for the Polaris RZR 4 seater. Features 12pt, polished stainless steel bolts rated to 190,000psi, far superior to the Grade 8 stock bolts (150,000psi) and a way better look. Fits all Polaris RZR 4 seaters incl XP1000, XP Turbo and Turbo-S (except ProXP).

$ 100.00 $ 115.00


BC9001

BC9001 - ARP Polaris RZR XP Turbo/XP1000 Front A-Arm Suspension & Hub Fastener Kit

BC x ARP exclusive front A-Arm suspension, spindle and hub bolt kit for the Polaris RZR. Features...

BC x ARP exclusive front A-Arm suspension, spindle and hub bolt kit for the Polaris RZR. Features 12pt, polished stainless steel bolts rated to 180,000psi, far superior to the Grade 8 stock bolts and a way better look. Fits Polaris RZR XP Turbo (16-up) and XP1000 (14-up). Does not fit Turbo-S, use BC9001-S

$ 135.00 $ 155.25


BC9002-10

BC9002-10 - ARP Polaris RZR XP1000, Xp Turbo, XP Turbo-S Rear Trailing Arm, Hub & 10mm Rad...

Exclusive ARP rear trailing arm, hub and radius rod (10mm) kit bolt kit for the Polaris RZR. Feat...

Exclusive ARP rear trailing arm, hub and radius rod (10mm) kit bolt kit for the Polaris RZR. Features 12pt, polished stainless steel bolts rated to 180,000psi, far superior to the Grade 8 stock bolts and a way better look. Fits Polaris RZR XP1000 and XP Turbo (16-up)

$ 90.00 $ 103.50


BC9002-12

BC9002-12 - ARP Polaris RZR XP1000, Xp Turbo, XP Turbo-S Rear Trailing Arm, Hub & 12mm Rad...

Exclusive ARP rear trailing arm, hub and radius rod (12mm) kit bolt kit for the Polaris RZR. Fea...

Exclusive ARP rear trailing arm, hub and radius rod (12mm) kit bolt kit for the Polaris RZR. Features 12pt, polished stainless steel bolts rated to 180,000psi, far superior to the Grade 8 stock bolts and a way better look. Fits Polaris RZR XP1000 and XP Turbo (16-up)

$ 190.00 $ 218.50


BC9004

BC9004 - ARP Polaris RZR XP Wheel Stud Kit - New Design (set/4)

Exclusive @arpbolts SxS wheel studs deliver the strength and performance required for extreme of...

Exclusive @arpbolts SxS wheel studs deliver the strength and performance required for extreme off-road use, whether it’s the dunes, trails, rocks or the race track. Made from heat-treated 8740 chromoly with cadmium plating for added corrosion resistance, ARP studs deliver 200,000psi tensile strength vs 150,000psi on the factory Grade 8 studs. ARP studs are designed with added shoulder length for proper wheel engagement, an oversize splined grip that keeps the stud secure on the hub and a pro...

$ 40.00 $ 46.00


BC9005

BC9005 - ARP Polaris RZR XP1000, XP Turbo, ProXP Front and Rear Brake Caliper Kit

Exclusive ARP front and rear brake caliper kit for the Polaris RZR. Features 12pt, polished stain...

Exclusive ARP front and rear brake caliper kit for the Polaris RZR. Features 12pt, polished stainless steel bolts rated to 180,000psi, far superior to the Grade 8 stock bolts and a way better look. Fits Polaris RZR XP1000, XP Turbo (14-up), ProXP

$ 35.00 $ 40.25


BC9009

BC9009 - ARP Polaris RZR XP Cam Bolt and Cam Gear Bolt Kit

Exclusive ARP cam cap and cam gear bolt kit for the Polaris RZR. Features 12pt, polished stainles...

Exclusive ARP cam cap and cam gear bolt kit for the Polaris RZR. Features 12pt, polished stainless steel bolts rated to 180,000psi, far superior to the Grade 8 stock bolts and a way better look. Fits all Polaris RZR XP's

$ 61.50 $ 70,725.00