USD
  • USD
  • JPY

D16Y8

The D Series inline 4 cylinder engine was used in variety of compact Honda models, most notably the 1995-2000 Honda Civic EX and the 1996-1997 Del Sol Si in the United States. This engine is also found in the 1996-2000 Civic Si out of Canada and is labeled as the D16Y6 in New Zealand. The D16Y8 is a SOHC (Single Overhead Cam) design with a displacement of 1.590cc. The factory redline is set at 6800 rpm with a rev limit to 7200 rpm and the VTEC switchover point at 5600 rpm. Factory compression ratio is 9.6:1, cylinder bore size is 75mm and crankshaft stroke is 90mm.

BC0070

BC0070 - Honda D16Y8/D16Z6 Spring/Titanium Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1070 Single Free Length 2.231" Seat 1.975" @ 58 lbs Open 1.500" @ 154 lbs Coil Bind 1.320" Retainer BC2070 Spring Seat OEM Net Cam Lift 0.490" / 12.45mm

$ 276.71 $ 326.52


BC2940

BC2940 - Honda/Acura 5.5mm Billet Keepers/Locks (fits BC2010 and BC2011)

5.5mm Stem, 7í«̴́ Billet Keepers/Locks set/32 - NOTE: If running late model cylinder head (K20 af...

5.5mm Stem, 7í«̴́ Billet Keepers/Locks set/32 - NOTE: If running late model cylinder head (K20 after 2004), you may need to purchase BC2940 keepers to accommodate BC2010 or BC2011 retainers.

$ 100.12 $ 118.14


BC3070

BC3070 - Honda D16Y8/D16Z6 Intake Valves (30mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 159.79 $ 188.55


BC3071

BC3071 - Honda D16Y8/D16Z6 Exhaust Valves (26mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 159.79 $ 188.55


BC3074

BC3074 - Honda D16Y8/D16Z6 Intake Valves (30.5mm / +.5mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 159.79 $ 188.55


BC3075

BC3075 - Honda D16Y8/D16Z6 Exhaust Valves (26.5mm / +.5mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 159.79 $ 188.55


BC3908

BC3908 - Honda D Series VTEC (D16Y8/D16Z6) Intake Valve Guides

5.5mm Intake - Manganese Silicon Aluminum Bronze

5.5mm Intake - Manganese Silicon Aluminum Bronze

$ 73.30 $ 86.49


BC3909

BC3909 - Honda D Series VTEC (D16Y8/D16Z6) Exhuast Valve Guides

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

$ 73.30 $ 86.49