USD

CAMSHAFTS

BC high performance camshafts are ground on state-of-the-art CNC cam grinders to insure accuracy and tolerances to within .02mm. Every BC camshaft profile has been prototyped and dyno tested for proven horsepower results prior to being placed into mass production. By grinding cores in high volume, Brian Crower, Inc. is able to pass the cost savings on to the end user. Quality at an affordable price. All BC cams are checked on a high speed, sub-micron accuracy measuring gauge. The Adcole Camshaft Measuring System uses individual measuring heads for each cam journal and cam lobe, with .01 micron resolution, taking one datum point each 1/10th of a degree or 3,600 data points per revolution. Measuring camshafts for rise error and chattermark detection, this model can measure 200 parts per hour.

BC0901

BC0901 - Polaris XP 1000 (14-up) Stage 2 All Purpose Camshafts (pair)

All purpose level spec, works with factory valve springs. Delivers excellent throttle response ou...

All purpose level spec, works with factory valve springs. Delivers excellent throttle response out of the turns or wash but still pulls on the straights. Adv Dur (.020") 259°/262° Dur @ .050 234°/232° Valve Lift (1:1) .414"/.397" Valve Lift (mm) 10.51/10.08

$ 499.00 $ 573.85

BC0990

BC0990 - Polaris XP 1000 (14-up) Custom Camshafts (pair)

Custom cut camshafts can be ground to any customer spec...within reason. Contact BC for complete ...

Custom cut camshafts can be ground to any customer spec...within reason. Contact BC for complete details on available lobe profiles and to go over your build and application.

$ 599.00 $ 688.85

BC0903

BC0903 - Polaris XP 1000 (14-up) Stage 4 Short Course Spec Camshafts (pair)

Big lift and duration spec focuses on top end power. Requires BC spring/retainer kit. ECU and cy...

Big lift and duration spec focuses on top end power. Requires BC spring/retainer kit. ECU and cylinder head work will enhance overall performance. Due to high lobe lift, it is mandatory that you change the valve guides and use BC valve seals. Failure to do so will result in retainer to guide contact causing damage to the head and/or cams. Adv Dur (.020") 265°/265° Dur @ .050 248°/244° Valve Lift (1:1) .450"/.450" Valve Lift (mm) 11.43/11.43

$ 499.00 $ 573.85

BC0931

BC0931 - Can-Am X3 (17-up) Stage 3 RR Duner & Trail Cams (pair)

Drop-in spec, that works with factory valve springs. Perfect for Duning with minimal mods and goo...

Drop-in spec, that works with factory valve springs. Perfect for Duning with minimal mods and good gains in the mid-range. For trails, delivers excellent throttle response out of the turns and thru the wash, still pulls hard on the top end. Best results on RR or larger turbo setup, requires ECU tune and 1300cc injectors for optimal gains. Now includes crank locking tool (#529036272) to insure proper installation. Adv Dur (.020") 276°/276° Dur @ .050 220°/220° Valve Lift (1:1) .350"/.35...

$ 594.15 $ 683.27

BC0904

BC0904 - Polaris XP 1000 (14-up) Stage 2+ Hardcore Trail Camshafts (pair)

More aggressive than the Stage 2 but still works with factory valve springs. Pulls hard up throug...

More aggressive than the Stage 2 but still works with factory valve springs. Pulls hard up through 9500 rpm but still delivers power on demand on the low end. ECU flash or tune recommended. Adv Dur (.020") 258°/258° Dur @ .050 230°/230° Valve Lift (1:1) .420"/.420" Valve Lift (mm) 10.67/10.67

$ 499.00 $ 573.85

BC0911

BC0911 - Polaris XP Turbo (16-up) Stage 2+ Duner/Trail Spec Camshafts

DUNER/HARDCORE TRAIL CAM PROFILEDesigned for stock turbo or modified turbo up to 28psi, works wit...

DUNER/HARDCORE TRAIL CAM PROFILEDesigned for stock turbo or modified turbo up to 28psi, works with stock valve springs up to factory rev limit, recommend BC spring kit if exceeding 8600 rpm. Requires tuning for optimum gains using PowerVision or HPTuners flash tuning device. Adv Dur (.020") 252°/252° Dur @ .050 230°/230° Valve Lift (1:1) .420"/.420" Valve Lift (mm) 10.67/10.67

$ 499.00 $ 573.85

BC0912

BC0912 - Polaris XP Turbo (16-up) Stage 3 Wild Duner Camshafts

HARDCORE DUNER/DRAG CAM PROFILEIntended for a built engine running in excess of 28psi boost. Req...

HARDCORE DUNER/DRAG CAM PROFILEIntended for a built engine running in excess of 28psi boost. Requires extensive tuning for optimum gains using PV or HPTuners flash tuning device or MoTeC and BC adjustable cam gears to dial out overlap due bigger duration. Requires BC0900. CNC ported head recommended for optimum gains. Adv Dur (.020") 264°/264° Dur @ .050 240°/240° Valve Lift (1:1) .430"/.430" Valve Lift (mm) 10.92/10.92

$ 499.00 $ 573.85

BC0902

BC0902 - Polaris XP 1000 (14-up) Stage 3 HardCore Trail Spec Camshafts (pair)

Designed for the experienced trail or dune rider who wants power throughout the rpm range. Requir...

Designed for the experienced trail or dune rider who wants power throughout the rpm range. Requires BC spring & retainer kit. ECU and head work for optimal gains. Adv Dur (.020") 260°/262° Dur @ .050 240°/240° Valve Lift (1:1) .430"/.430" Valve Lift (mm) 11.43/11.43

$ 499.00 $ 573.85

BC0951

BC0951 - Yamaha YXZ / 998 (16-up) Stage 2 Mild Duner/Trail Spec Camshafts

Designed for mild duner and trails where focus is more on the lower powerband. Works with stock v...

Designed for mild duner and trails where focus is more on the lower powerband. Works with stock valve train and stock ECU, although reflash will deliver optimum results. Adv Dur (.020") 248°/248° Dur @ .050 228°/228° Valve Lift (1:1) .350"/.350" Valve Lift (mm) 8.89/8.89

$ 499.00 $ 573.85

BC0952

BC0952 - Yamaha YXZ / 998 (16-up) Stage 3 Viper+ Spec Camshafts

Added duration, lift and faster opening ramp speeds than the OEM Viper cam specs. Requires ECU tu...

Added duration, lift and faster opening ramp speeds than the OEM Viper cam specs. Requires ECU tuning and other mods to benefit performance. Requires BC0950B (shim in bucket). Yamaha OE Viper Spec: 240°/232° @ .050” / .372”/.353” Lift Adv Dur (.020") 266°/260° Dur @ .050 254°/244° Valve Lift (1:1) .387"/.380" Valve Lift (mm) 9.83/9.65

$ 499.00 $ 573.85

BC0953

BC0953 - Yamaha YXZ / 998 (16-up) Stage 3 Turbo Spec Camshafts

Pick up 30+whp over the Viper cams at 30psi with this BC turbo spec. High lift, shorter duration ...

Pick up 30+whp over the Viper cams at 30psi with this BC turbo spec. High lift, shorter duration profile to build cylinder pressure under big boost. Tuning and ECU mods recommended. Requires BC0950B (shim in bucket) or BC0950 (shim in retainer). Adv Dur (.020") 252°/252° Dur @ .050 232°/232° Valve Lift (1:1) .370"/.370" Valve Lift (mm) 9.40/9.40

$ 499.00 $ 573.85

BC0981

BC0981 - Polaris Pro R (21-up) Stage 2 Drop-In Camshafts (pair)

All purpose level spec, works with factory valve springs. Delivers excellent throttle response ou...

All purpose level spec, works with factory valve springs. Delivers excellent throttle response out of the turns or wash but still pulls on the straights. Adv Dur (.020") 258°/258° Dur @ .050 230°/230° Valve Lift (1:1) .420"/.420" Valve Lift (mm) 10.67/10.67

$ 799.00 $ 918.85

BC0982

BC0982 - Polaris Pro R (21-up) Stage 2+ Duner Camshafts (pair)

More aggressive than the Stage 2 but still works with factory valve springs. Pulls hard up throug...

More aggressive than the Stage 2 but still works with factory valve springs. Pulls hard up through 9500 rpm but still delivers power on demand on the low end. ECU flash or tune recommended. Adv Dur (.020") 260°/262° Dur @ .050 240°/240° Valve Lift (1:1) .430"/.430" Valve Lift (mm) 10.92/10.92

$ 799.00 $ 918.85

BC0905

BC0905 - Polaris XP 1000 (14-up) Stage 5 Race Only Camshafts (pair)

High lift, big duration spec for high compression (12.5:1 minimum) racing applications like Short...

High lift, big duration spec for high compression (12.5:1 minimum) racing applications like Short Course or Drag Racing. Pulls hard up through 9900 rpm with emphahsis on the top end. ECU flash or tune recommended. Due to high lobe lift, it is mandatory that you change the valve guides and use BC valve seals. Failure to do so will result in retainer to guide contact causing damage to the head and/or cams. Adv Dur (.020") 276°/276° Dur @ .050 254°/254° Valve Lift (1:1) .460"/.460" Valv...

$ 499.00 $ 573.85

BC0981T

BC0981T - Polaris Pro R (21-up) Stage 2+ Forced Induction Camshafts (pair)

Designed for boost levels in the 8 to 20psi range, works well with non-ported cylinder head and s...

Designed for boost levels in the 8 to 20psi range, works well with non-ported cylinder head and stock valve springs. Wider lobe separation & short duration build more cylinder pressure. Adv Dur (.020") 262°/258° Dur @ .050 234°/230° Valve Lift (1:1) .436"/.422" Valve Lift (mm) 11.07/10.72

$ 799.00 $ 918.85

BC9340

BC9340 - Can-Am X3 Solid Bucket Conversion Kit w/Solid Cams

BC solid lifter kit and BC solid lifter camshaft kit. Get the best of both and save some money wi...

BC solid lifter kit and BC solid lifter camshaft kit. Get the best of both and save some money with this cam, lifter and spring kit combo. Includes custom ground BC solid lifter cams designed to your specific application. Since BC grinds the world's fastest X3 solid lifter camshafts, makes sense that we deliver the world's lightest solid bucket conversion kit. Features stock O.D. cam buckets from Arrow Precision, the best, most reliable bucket available on the market...not some repurposed OEM...

$ 1,249.00 $ 1,436.35

BC9340DLC

BC9340DLC - Can-Am X3 DLC Solid Bucket Conversion Kit w/Solid Cams

BC solid lifter kit and BC solid lifter camshaft kit. Get the best of both and save some money wi...

$ 1,590.00 $ 1,828.50

BC0910

BC0910 - Polaris XP Turbo (16-up) Stage 2 Drop-In Spec Camshafts

DROP-IN TURBO R SPEC CAM PROFILEModified Turbo R spec for stock turbo or modified turbo up to 22p...

DROP-IN TURBO R SPEC CAM PROFILEModified Turbo R spec for stock turbo or modified turbo up to 22psi, works with stock valve springs up to factory rev limit, recommend BC spring kit if exceeding 8600 rpm. Requires mild stock ECU flash tuning for optimum gains. Adv Dur (.020") 252°/248° Dur @ .050 234°/228° Valve Lift (1:1) .421"/.406" Valve Lift (mm) 10.69/10.31

$ 499.00 $ 573.85

BC0995

BC0995 - Yamaha YXZ / 998 (16-up) Custom Spec Camshafts

BC custom grind Yamaha YXZ, SideWinder or Viper camshaft. Requires BC0950B (shim in bucket) or BC...

BC custom grind Yamaha YXZ, SideWinder or Viper camshaft. Requires BC0950B (shim in bucket) or BC0950 (shim in retainer). Adv Dur (.020") Custom Dur @ .050 Custom Valve Lift (1:1) Custom Valve Lift (mm) Custom

$ 599.00 $ 688.85

1 – 19 product(s) of 19