USD
  • USD
  • JPY

HONDA


BC2940

BC2940 - Honda/Acura 5.5mm Billet Keepers/Locks (fits BC2010 and BC2011)

5.5mm Stem, 7í«̴́ Billet Keepers/Locks set/32 - NOTE: If running late model cylinder head (K20 af...

5.5mm Stem, 7í«̴́ Billet Keepers/Locks set/32 - NOTE: If running late model cylinder head (K20 after 2004), you may need to purchase BC2940 keepers to accommodate BC2010 or BC2011 retainers.

$ 108.28 $ 124,522.00


BC0070

BC0070 - Honda D16Y8/D16Z6 Spring/Titanium Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1070 Single Free Length 2.231" Seat 1.975" @ 58 lbs Open 1.500" @ 154 lbs Coil Bind 1.320" Retainer BC2070 Spring Seat OEM Net Cam Lift 0.490" / 12.45mm

$ 299.27 $ 344.16


BC0070S

BC0070S - Honda D16Y8, D16Z6 Single Spring/Steel Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1070 Single Free Length 2.231" Seat 1.975" @ 58 lbs Open 1.500" @ 154 lbs Coil Bind 1.320" Retainer BC2070S Spring Seat OEM Net Cam Lift 0.490" / 12.45mm

$ 194.03 $ 223.13


BC0022

BC0022 - Honda/Acura B18A/B Stage 2 Camshafts - Normally Aspirated Spec

Hot street/strip or road race profile. Use with CAI, H, E, A/F modifications for optimum horsepow...

Hot street/strip or road race profile. Use with CAI, H, E, A/F modifications for optimum horsepower and torque. Requires kit BC0020. Adv Dur 300°/300° Dur @ .050 220°/220° Valve Lift (1.75:1) .423"/.423" Valve Lift (mm) 10.74/10.49 Cam Timing Tag

$ 488.94 $ 562,281.00


BC0010S

BC0010S - Honda B16A/B18C Spring/Steel Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1010 Dual Free Length 1.607" Seat 1.350" @ 80 lbs Open 0.900" @ 220 lbs Coil Bind 0.765" Retainer BC2011 Spring Seat OEM Net Cam Lift 0.500" / 12.7mm

$ 338.15 $ 388.87


BC0072

BC0072 - Honda D16Y8 Stage 2 Cams - Forced Induction

Intended for built engines with a supercharger or turbo. Engine mods, ECU tuning and low compress...

Intended for built engines with a supercharger or turbo. Engine mods, ECU tuning and low compression pistons are recommended. Requires kit BC0070. Adv Dur 310°/316° Dur @ .050 232°/218° Valve Lift (1.6:1) .432"/.424" Valve Lift (mm) 10.97/10.77 Cam Timing Tag

$ 412.21 $ 474.04


BC2011-1

BC2011-1 - Steel Retainer - (Honda/Acura B18C/B16A, H22, K Series, F Series) High Mileage ...

BC steel retainers are CNC machined from hardened 4140 round bar chromoly steel to exacting toler...

BC steel retainers are CNC machined from hardened 4140 round bar chromoly steel to exacting tolerances. BC recommends using steel retainers for all high mileage, dual spring applications (over 7000 miles annually) or when looking to cut expenses. Stem 5.5mm O.D. 1.047" Step 1 0.866" Step 2 0.605" Inst Ht Stock Gram Wt 13.2

$ 5.97 $ 6.87


BC0020S

BC0020S - Honda/Acura B18A/B/B20B Spring/Steel Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1020 Dual Free Length 1.606" Seat 1.400" @ 70 lbs Open 0.905" @ 210 lbs Coil Bind 0.815" Retainer BC2020S Spring Seat OEM Net Cam Lift 0.470" / 11.94mm

$ 333.12 $ 383,088.00


BC0040S

BC0040S - Honda K20A/K20Z/F20C/F22C Spring/Steel Retainer/Seat Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. WARNING: If running a late model cylinder head (after 2004), you may need to purchase BC2940 keepers to accommodate the BC2010 or BC2011 retainers. Honda changed the keeper groove angles, therefore your stock keepers/locks may not fit the BC retainers properly causing potential damage. T...

$ 401.14 $ 461,311.00


BC8801

BC8801 - Honda B Series Adjustable Cam Gears

Adjustable Cam Gears for Honda B16A, B18C, B18A/B, B20B - Set/2 - 6061-T6 Billet Aluminum, Laser ...

Adjustable Cam Gears for Honda B16A, B18C, B18A/B, B20B - Set/2 - 6061-T6 Billet Aluminum, Laser Etched, Four Clamping Bolts Calibration Instructions

$ 309.00 $ 355.35


BC8801B

BC8801B - Honda B Series Adjustable Cam Gears - All Black

Adjustable Cam Gears for Honda B16A, B18C, B18A/B, B20B - Set/2 - 6061-T6 Billet Aluminum (all bl...

Adjustable Cam Gears for Honda B16A, B18C, B18A/B, B20B - Set/2 - 6061-T6 Billet Aluminum (all black), Laser Etched, Four Clamping Bolts

$ 309.00 $ 355.35


BC3908

BC3908 - Honda D Series VTEC (D16Y8/D16Z6) Intake Valve Guides

5.5mm Intake - Manganese Silicon Aluminum Bronze

5.5mm Intake - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3021

BC3021 - Honda/Acura B18A/B Exhaust Valves (28mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3070

BC3070 - Honda D16Y8/D16Z6 Intake Valves (30mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3020

BC3020 - Honda/Acura B18A/B Intake Valves (31mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC0020

BC0020 - Honda/Acura B18A/B/B20B Spring/Titanium Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1020 Dual Free Length 1.606" Seat 1.400" @ 70 lbs Open 0.905" @ 210 lbs Coil Bind 0.815" Retainer BC2020 Spring Seat OEM Net Cam Lift 0.470" / 11.94mm

$ 423.43 $ 486.94


BC0012

BC0012 - Honda B16A/B18C Stage 2 Camshafts - Normally Aspirated Spec

Hot street/strip or road race spec. Use with CAI, H, E, ECU, A/F mods. Excellent street manners a...

Hot street/strip or road race spec. Use with CAI, H, E, ECU, A/F mods. Excellent street manners and idle quality. Requires kit BC0010 or BC0010S. Adv Dur 306°/300° Dur @ .050 254°/248° Valve Lift (1.55:1) .472"/.472" Valve Lift (mm) 11.99/11.99 Cam Timing Tag

$ 632.18 $ 727,007.00


BC1070-1

BC1070-1 - Valve Spring - Single (Honda D16Y8/D16Z6) - 1 only

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type Single Free Length 2.231" Seat 1.975" @ 58 lbs Open 1.500" @ 154 lbs Coil Bind 1.320" Retainer BC2070, OEM Spring Seat OEM Net Cam Lift 0.490" / 12.45mm

$ 5.97 $ 6.87


BC2010-1

BC2010-1 - Titanium Retainer - (Honda/Acura B18C/B16A, H22, K Series, F Series) Limited M...

BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. BC r...

BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. BC recommends using titanium retainers on dual springs ONLY if limited street use (less than 7000 miles per year). Although titanium is approximately 40% lighter, and is perceived as stronger than steel, it will wear over time on a dual spring setup. Stem 5.5mm O.D. 1.047" Step 1 0.866" Step 2 0.605" Inst Ht Stock Gram Wt 6.8

$ 12.37 $ 14.23


BC3011B

BC3011B - Honda/Acura B16A/B18C Exhaust Valves (28mm / STD / Black Nitride w/Flat Face) - ...

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3071

BC3071 - Honda D16Y8/D16Z6 Exhaust Valves (26mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC0040

BC0040 - Honda K20A/K20Z/F20C/F22C Spring/Titanium Retainer/Seat Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. WARNING: If running a late model cylinder head (after 2004), you may need to purchase BC2940 keepers to accommodate the BC2010 or BC2011 retainers. Honda changed the keeper groove angles, therefore your stock keepers/locks may not fit the BC retainers properly causing potential damage. T...

$ 487.14 $ 560,211.00


BC0032

BC0032 - Honda H22 Stage 2 Camshafts - Normally Aspirated/High Boost Profile

All motor with 11.5:1+ compression or high boost (18lbs+) applications. Use with CAI, H, E, ECU, ...

All motor with 11.5:1+ compression or high boost (18lbs+) applications. Use with CAI, H, E, ECU, A/F mods. Excellent street manners. Requires kit BC0030 or BC0030S. Adv Dur 312°/310° Dur @ .050 255°/248° Valve Lift (1.55:1) .470"/.469" Valve Lift (mm) 11.94/11.91 Cam Timing Tag

$ 632.18 $ 727,007.00


BC0030

BC0030 - Honda H22 Spring/Titanium Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1030 Dual Free Length 1.815" Seat 1.400" @ 88 lbs Open 0.950" @ 220 lbs Coil Bind 0.790" Retainer BC2010 Spring Seat OEM Net Cam Lift 0.510" / 12.95mm

$ 429.84 $ 494,316.00


BC0021

BC0021 - Honda/Acura B18A/B Stage 2 Camshafts - Forced Induction Spec

Short duration profile builds cylinder pressure by reducing overlap, high lift for more air intak...

Short duration profile builds cylinder pressure by reducing overlap, high lift for more air intake. Requires kit BC0020. Adv Dur 280°/280° Dur @ .050 204°/204° Valve Lift (1.75:1) .470"/.470" Valve Lift (mm) 11.94/11.94 Cam Timing Tag

$ 488.94 $ 562,281.00


BC3011-1

BC3011-1 - Individual Honda/Acura B16A/B18C Exhaust Valves (28mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38


BC3909

BC3909 - Honda D Series VTEC (D16Y8/D16Z6) Exhuast Valve Guides

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3061

BC3061 - Honda F20C/F22C Exhaust Valves (31mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3010B

BC3010B - Honda/Acura B16A/B18C Intake Valves (33mm / STD / Black Nitride w/Flat Face) - s...

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC0030S

BC0030S - Honda H22 Spring/Steel Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1030 Dual Free Length 1.815" Seat 1.400" @ 88 lbs Open 0.950" @ 220 lbs Coil Bind 0.790" Retainer BC2011 Spring Seat OEM Net Cam Lift 0.510" / 12.95mm

$ 338.16 $ 388,884.00


BC3060

BC3060 - Honda F20C/F22C Intake Valves (36mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC0031-2

BC0031-2 - Honda H22 Stage 2 Camshafts - Forced Induction Spec

NEW PROFILE DESIGN - Short duration profile builds cylinder pressure by reducing overlap, high li...

NEW PROFILE DESIGN - Short duration profile builds cylinder pressure by reducing overlap, high lift for more air intake. Requires kit BC0030 or BC0030S. Adv Dur 310°/308° Dur @ .050 257°/256° Valve Lift (1.55:1) .486"/.465" Valve Lift (mm) 12.34/11.81 Cam Timing Tag

$ 632.18 $ 727,007.00


BC0013

BC0013 - Honda B16A/B18C Stage 3 Camshafts - Normally Aspirated Spec

Intended for fully built engine. Extensive modifications, high compression pistons and tuning rec...

Intended for fully built engine. Extensive modifications, high compression pistons and tuning recommended. Requires kit BC0010 or BC0010S. Adv Dur 310°/308° Dur @ .050 260°/254° Valve Lift (1.55:1) .496"/.496" Valve Lift (mm) 12.60/12.60 Cam Timing Tag

$ 632.18 $ 727,007.00


BC0924

BC0924 - Honda Talon (19-up) Stage 3 Turbo Spec

New cams...not regrinds! Short duration and more lift to build more cylinder pressure for turboch...

New cams...not regrinds! Short duration and more lift to build more cylinder pressure for turbocharged applications, tuning and ECU mods recommended. Requires kit BC0920. Adv Dur (.006") 264°/270° Dur @ .050 240°/230° Valve Lift (1:1) .420"/.402" Valve Lift (mm) 10.67/10.21

$ 360.00 $ 414.00


BC0071

BC0071 - Honda D16Y8 Stage 2 Cams - Normally Aspirated

Drop in cam (minimal tuning) that delivers spirited driving. Delivers double digit HP gains witho...

Drop in cam (minimal tuning) that delivers spirited driving. Delivers double digit HP gains without serious modifications. Requires kit BC0070. Adv Dur 316°/308° Dur @ .050 235°/224° Valve Lift (1.6:1) .432"/.436" Valve Lift (mm) 10.97/10.07 Cam Timing Tag

$ 412.21 $ 474.04


AR8608

AR8608 - Honda D16Y8 Head ARP Head Studs

Honda D16Y8 ARP Head Studs - ARP #208-4305 - 8740 Alloy Heat Treated to 200,000 p.s.i.

Honda D16Y8 ARP Head Studs - ARP #208-4305 - 8740 Alloy Heat Treated to 200,000 p.s.i.

$ 145.14 $ 166,911.00


AR8697 - Honda Talon 1000 ARP2000 Head Stud Kit

Made from ARP2000 material and rated to 220,000 psi, ARP cylinder head studs not only offer super...

Made from ARP2000 material and rated to 220,000 psi, ARP cylinder head studs not only offer superior clamp loads over cylinder head bolts, they provide proper alignment of the head and gasket with more accurate and consistent torque loading. Bolts will actually twist while torquing to proper spec, greatly reducing their ability to hold true.

$ 190.00 $ 218.50


BC8292-2

BC8292-2 - Honda Talon 1000 (92-93mm x .052”) Cometic Head Gasket

92-93mm cyl bore, .052” Thickness - Cometic three layer gaskets combine advanced materials with s...

92-93mm cyl bore, .052” Thickness - Cometic three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The MLS head gasket is comprised of a three layer setup - Viton coated embossed spring steel outer layers surround a steel inner layer that provides support and thickness to the gasket. Embossments on the gasket allow for a proper seal around oil and water passages.

$ 80.00 $ 92.00


BC2070S-1

BC2070S-1 - Steel Retainer - (Honda D16Y8/D16Z6, R18, L15) - 1 only

BC steel retainers are CNC machined from hardened 4140 round bar chromoly steel to exacting toler...

BC steel retainers are CNC machined from hardened 4140 round bar chromoly steel to exacting tolerances. BC recommends using steel retainers for all high mileage, dual spring applications (over 7000 miles annually) or when looking to cut expenses. Stem 5.5mm O.D. 0.875" Step 1 0.612" Step 2 N/A Inst Ht Stock Gram Wt 8.0

$ 5.97 $ 6.87


BC2904-1

BC2904-1 - Spring Seat - (Honda K20A2/K20Z3, F20C/F22C, C30A/C32B) - 1 only

BC steel spring seats are CNC machined from hardened 4140 round bar chromoly steel to exacting to...

BC steel spring seats are CNC machined from hardened 4140 round bar chromoly steel to exacting tolerances. Spring # BC1040-1 O.D. 1.102" Step 1 0.844" Step 2 0.613" Gram Wt 9.0

$ 3.86 $ 4,439.00


BC2070-1

BC2070-1 - Titanium Retainer - (Honda D16Y8/D16Z6, R18, L15) - 1 only

BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. BC r...

BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. BC recommends using titanium retainers on dual springs ONLY if limited street use (less than 7000 miles per year). Although titanium is approximately 40% lighter, and is perceived as stronger than steel, it will wear over time on a dual spring setup. Stem 5.5mm O.D. 0.875" Step 1 0.612" Step 2 N/A Inst Ht Stock Gram Wt 4.6

$ 12.37 $ 14.23


BC0011-2

BC0011-2 - Honda B16A/B18C Stage 2 Camshafts - Forced Induction Spec

Hot street/strip for boost. Use with CAI, H, E, ECU, A/F mods. Excellent street manners and idle ...

Hot street/strip for boost. Use with CAI, H, E, ECU, A/F mods. Excellent street manners and idle quality. Requires kit BC0010 or BC0010S. Adv Dur 308°/310° Dur @ .050 257°/256° Valve Lift (1.55:1) .486"/.465" Valve Lift (mm) 12.34/11.81 Cam Timing Tag

$ 632.18 $ 727,007.00


BC0922

BC0922 - Honda Talon (19-up) Stage 3 High Performance Trail Cam

New cams...not regrinds! Hardcore aggressive trail riding with minimal mods + tune for good gains...

New cams...not regrinds! Hardcore aggressive trail riding with minimal mods + tune for good gains in the mid-range. For trails, delivers excellent throttle response out of the turns and thru the wash, still pulls hard on the top end.  Adv Dur (.006") 272°/270° Dur @ .050 242°/236° Valve Lift (1:1) .410"/.390" Valve Lift (mm) 10.42/9.90

$ 360.00 $ 414.00


BC6922

BC6922 - Honda Talon (19-up) Pro625+ Connecting Rods w/ARP625+ Fasteners

Honda Talon - Pro625+ w/ARP Custom Age 625+ Fasteners. Made from aerospace grade, 4340 chromoly s...

Honda Talon - Pro625+ w/ARP Custom Age 625+ Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required for high rpm applications. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.084" BE Bore 1.8504" BE Width 0.903" PE Bore 0.866" PE Width 0.903" Gram Wt 541 Torque Specs 65-70 ft lbs - 3/8"

$ 530.00 $ 609.50


BC3907

BC3907 - Honda F Series VTEC (F20C/F22C) Exhuast Valve Guides

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3906

BC3906 - Honda F Series VTEC (F20C/F22C) Intake Valve Guides

5.5mm Intake - Manganese Silicon Aluminum Bronze

5.5mm Intake - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3901-2

BC3901-2 - Honda H22 Series VTEC Exhuast Valve Guides

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3901

BC3901 - Honda/Acura B Series VTEC (B16A, B18C, B17A) Exhuast Valve Guides

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3900-2

BC3900-2 - Honda H22 Series VTEC Intake Valve Guides

5.5mm Intake - Manganese Silicon Aluminum Bronze

5.5mm Intake - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3010S-8

BC3010S-8 - Honda/Acura B16A/B18C Intake Valves (33mm / STD) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 3...

$ 23.81 $ 27.38


BC3900

BC3900 - Honda/Acura B Series VTEC (B16A, B18C, B17A) Intake Valve Guides

5.5mm Intake - Manganese Silicon Aluminum Bronze

5.5mm Intake - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3040

BC3040 - Honda/Acura K20A2/K20A/K20Z3 Intake Valves (35mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC0920S

BC0920S - Honda Talon (19-up) Spring/Steel Retainer/Seat Kit

Drop-in install, no machine work. Designed for high rpm, BC valve springs by PAC Racing are wound...

Drop-in install, no machine work. Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC retainers are machined from premium 4140 chromoly alloy for added reliability for high endurance use.  Type BC1920 Single Free Length 1.785" Seat 1.450" @ 75 lbs Open 1.115" @ 163 lbs Coil Bind 0.950" Retainer BC2920S Spring Seat Stock Net Cam...

$ 170.00 $ 195.50


BC8292-1

BC8292-1 - Honda Talon 1000 (92-93mm x .023”) Cometic Head Gasket

92-93mm cyl bore, .023” Thickness - Cometic three layer gaskets combine advanced materials with s...

92-93mm cyl bore, .023” Thickness - Cometic three layer gaskets combine advanced materials with state-of-the-art manufacturing processes to provide custom-tailored solutions to meet the needs of each individual application. The MLS head gasket is comprised of a three layer setup - Viton coated embossed spring steel outer layers surround a steel inner layer that provides support and thickness to the gasket. Embossments on the gasket allow for a proper seal around oil and water passages.

$ 80.00 $ 92.00


CP2090

CP2090 - Honda Talon 1000 (19-up) CP Shelf Pistons w/All Hardware - 92mm x 9.5:1

Pistons are the backbone of any true hardcore racing engine and that’s where CP-Carrillo excels. ...

Pistons are the backbone of any true hardcore racing engine and that’s where CP-Carrillo excels. Our Engineering department started off analyzing the competition, gathering industry data and deciding to make the highest level of pistons, period. The heart and soul of our pistons are built through our Engineering Department and its resources. This department is made up of several factors that push them ahead of the competition; Reverse Engineering, Design Experience and Flexibility, Analysis a...

$ 560.00 $ 644.00


BC3010-1

BC3010-1 - Individual Honda/Acura B16A/B18C Intake Valves (33mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38


BC3905

BC3905 - Honda K Series VTEC (K20A/Z, K24A) Exhuast Valve Guides

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

5.5mm Exhaust - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3904

BC3904 - Honda K Series VTEC (K20A/Z, K24A) Intake Valve Guides

5.5mm Intake - Manganese Silicon Aluminum Bronze

5.5mm Intake - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3011

BC3011 - Honda/Acura B16A/B18C Exhaust Valves (28mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC0061

BC0061 - Honda Stage 2 Cams - Normally Aspirated / Forced Induction

The short duration and high exhaust lift, makes the BC0061 cams a perfect choice for forced induc...

The short duration and high exhaust lift, makes the BC0061 cams a perfect choice for forced induction engines but the specs also deliver a nice HP gain in All Motor applications as well. Use with BC0040 spring/retainer kit. Adv Dur 310°/308° Dur @ .050 232°/228° Valve Lift (1.8:1) .512"/.492" Valve Lift (mm) 13.00/12.50 Cam Timing Tag

$ 794.95 $ 914.19


BC0042-2

BC0042-2 - Honda K20A/K20Z Stage 2 Camshafts - Normally Aspirated/High Boost

8620 Billet - All motor (11.5:1+) or high boost (18lbs+). Use with CAI, H, E, ECU, A/F mods. Exce...

8620 Billet - All motor (11.5:1+) or high boost (18lbs+). Use with CAI, H, E, ECU, A/F mods. Excellent street manners and idle quality. Requires kit BC0040 or BC0040S. Adv Dur 304°/300° Dur @ .050 234°/228° Valve Lift (1.75:1) .525"/.472" Valve Lift (mm) 13.34/11.99 Cam Timing Tag

$ 951.24 $ 1,093.93


BC0010

BC0010 - Honda B16A/B18C Spring/Titanium Retainer Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1010 Dual Free Length 1.607" Seat 1.350" @ 80 lbs Open 0.900" @ 220 lbs Coil Bind 0.765" Retainer BC2010 Spring Seat OEM Net Cam Lift 0.500" / 12.7mm

$ 429.84 $ 494,316.00


AR8607

AR8607 - Honda F20C Head ARP Head Studs

Honda F20C ARP Head Studs - ARP #208-4702 - 8740 Alloy Heat Treated to 200,000 p.s.i.

Honda F20C ARP Head Studs - ARP #208-4702 - 8740 Alloy Heat Treated to 200,000 p.s.i.

$ 193.85 $ 222.93


BC3821

BC3821 - Honda Talon 1000 Inconel Exhaust Valves - 31.0mm (STD)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant Inconel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under ...

$ 120.00 $ 138.00


BC3031-1

BC3031-1 - Individual Honda H22/H22A Exhaust Valves (30mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38


BC3030-1

BC3030-1 - Individual Honda H22/H22A Intake Valves (35mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38


BC6007

BC6007 - Honda L15B (17-up Civic Si, Accord, CR-V) - ProH2K Connecting Rods w/ARP2000 Fast...

Honda L15B - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high ...

Honda L15B - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required to turn up the boost, the nitrous and/or the RPM range. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.5452" BE Bore 1.6929" BE Width 0.7015" PE Bore 0.787" PE Width 0.7015" Gram Wt 400 Torque Specs 50-...

$ 596.15 $ 685.57


BC8208

BC8208 - Honda F20C/F22C BC Head Gaskets - 88mm Bore

BC Made In Japan Head Gaskets - Honda F20C/F22C - 88mm Bore / 0.8mm Thickness

BC Made In Japan Head Gaskets - Honda F20C/F22C - 88mm Bore / 0.8mm Thickness

$ 171.99 $ 197.79


BC6008

BC6008 - Honda R18 (JDM/Euro Civic 06-up) - ProH2K Connecting Rods w/ARP2000 Fasteners

Honda R18 - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high p...

Honda R18 - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required to turn up the boost, the nitrous and/or the RPM range. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 6.200" BE Bore 1.890" BE Width 0.761" PE Bore 0.787" PE Width 0.761" Gram Wt 470 Torque Specs 65 ft lb...

$ 596.15 $ 685.57


BC4030

BC4030 - ACL Honda H22A1 Bearing Set (50mm main 93-96) - OEM Sizing

ACL Race Series HX - H22A1 1993-96 Rods - ACL #4B1912HX (47.98-48.00mm) Mains - ACL #5M1937A (49....

ACL Race Series HX - H22A1 1993-96 Rods - ACL #4B1912HX (47.98-48.00mm) Mains - ACL #5M1937A (49.98-50.00mm) Thrust - ACL #1T1957 (61.25-61.50mm) The unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings. Designed to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 & 8 cylinder applications.

$ 237.04 $ 272,596.00


BC3902

BC3902 - Honda/Acura B18A, B18B, B20B, H23 Intake Valve Guides

6.6mm Intake - Manganese Silicon Aluminum Bronze

6.6mm Intake - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3010

BC3010 - Honda/Acura B16A/B18C Intake Valves (33mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3074S-8

BC3074S-8 - Honda D16Y8/D16Z6 Intake Valves (30.5mm / +.5mm) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 3...

$ 190.52 $ 219,098.00


BC0088S - Honda L15B7/L15CA Spring/Steel Retainer/Keeper Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1070 IN/BC1089 EX Free Length 2.231" Seat 1.975" @ 58 lbs Open 1.500" @ 154 lbs Coil Bind 1.320" Retainer BC2070 Keepers BC2940 Net Cam Lift 0.490" / 12.45mm

$ 290.23 $ 333.76


BC2020S-1

BC2020S-1 - Steel Retainer - (Honda/Acura B18A/B18B/B20B) - 1 only

BC steel retainers are CNC machined from hardened 4140 round bar chromoly steel to exacting toler...

BC steel retainers are CNC machined from hardened 4140 round bar chromoly steel to exacting tolerances. BC recommends using steel retainers for all high mileage, dual spring applications (over 7000 miles annually) or when looking to cut expenses. Stem 6.5mm O.D. 1.102" Step 1 0.806" Step 2 0.599" Inst Ht Stock Gram Wt 11.3

$ 5.97 $ 6.87


BC1010-1

BC1010-1 - Valve Spring - Dual (Honda/Acura B18C/B16A/B17A, Nissan KA24DE) - 1 only

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type Dual Free Length 1.607" Seat 1.350" @ 80 lbs Open 0.900" @ 220 lbs Coil Bind 0.765" Retainer BC2010, BC2011, BC2210 Spring Seat BC2904 or OEM Net Cam Lift 0.500" / 12.7mm

$ 17.12 $ 19,688.00


BC6015

BC6015 - Honda D16 - ProH2K Connecting Rods w/ARP2000 Fasteners

Honda D16Y8/Z6 - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC h...

Honda D16Y8/Z6 - ProH2K w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required to turn up the boost, the nitrous and/or the RPM range. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.394" BE Bore 1.890" BE Width 0.892" PE Bore 0.748" PE Width 0.892" Gram Wt 532 Torque Specs 50-...

$ 596.15 $ 685.57


BC4010

BC4010 - ACL Honda B16A Bearing Set - OEM Sizing

ACL Race Series HX: Rods - ACL #4B1946HX (44.98-45.00mm) Mains - ACL #5M1959HX (54.98-55.00mm) Th...

ACL Race Series HX: Rods - ACL #4B1946HX (44.98-45.00mm) Mains - ACL #5M1959HX (54.98-55.00mm) Thrust - ACL #1T1957 (61.25-61.50mm) The unique combination of design, metallurgy and engineering come together to deliver what drivers expect from high performance Trimetal engine bearings. Designed to withstand higher RPM conditions, ACL Race Series Engine Bearings are available for many of the popular 4, 6 & 8 cylinder applications.

$ 237.04 $ 272,596.00


BC3903

BC3903 - Honda/Acura B18A, B18B, B20B, H23 Exhuast Valve Guides

6.6mm Exhaust - Manganese Silicon Aluminum Bronze

6.6mm Exhaust - Manganese Silicon Aluminum Bronze

$ 80.81 $ 92.93


BC3045

BC3045 - Honda/Acura K20A2/K20A/K20Z3 Exhaust Valves (31mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3041

BC3041 - Honda/Acura K20A2/K20A/K20Z3 Exhaust Valves (30mm / STD) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


AR8704

AR8704 - Honda H22 ARP Main Studs

Honda H22 ARP Main Studs - ARP #208-5401 - 8740 Alloy Heat Treated to 200,000 p.s.i.

Honda H22 ARP Main Studs - ARP #208-5401 - 8740 Alloy Heat Treated to 200,000 p.s.i.

$ 143.78 $ 165,347.00


AR8602

AR8602 - Honda B18A/B ARP Head Studs

Honda B18A/B ARP Head Studs - ARP #208-4302 - 8740 Alloy Heat Treated to 200,000 p.s.i.

Honda B18A/B ARP Head Studs - ARP #208-4302 - 8740 Alloy Heat Treated to 200,000 p.s.i.

$ 250.43 $ 287.99


BC3820

BC3820 - Honda Talon 1000 Stainless Steel Intake Valves - 36.5mm (STD)

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 80.00 $ 92.00


BC9024

BC9024 - ARP Honda Talon Wheel Stud Kit (set/4)

Exclusive @arpbolts SxS wheel studs deliver the strength and performance required for extreme of...

Exclusive @arpbolts SxS wheel studs deliver the strength and performance required for extreme off-road use, whether it’s the dunes, trails, rocks or the race track. Made from heat-treated 8740 chromoly with cadmium plating for added corrosion resistance, ARP studs deliver 200,000psi tensile strength vs 150,000psi on the factory Grade 8 studs. ARP studs are designed with added shoulder length for proper wheel engagement, an oversize splined grip that keeps the stud secure on the hub and a pro...

$ 35.00 $ 40.25


BC3071-1

BC3071-1 - Individual Honda D16Y8/D16Z6 Exhaust Valves (26mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38


BC3021-1

BC3021-1 - Individual Honda/Acura B18A/B Exhaust Valves (28mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38


BC3020-1

BC3020-1 - Individual Honda/Acura B18A/B Intake Valves (31mm / STD) - 1 only valve

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 23.81 $ 27.38


BC3075S-8

BC3075S-8 - Honda D16Y8/D16Z6 Exhaust Valves (26.5mm / +.5mm) - set/8

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing...

BLACK NITRIDE VALVES - Brand new valves but not the new style BC polished with dish face. Blowing out existing inventory. These are stainless steel, black nitride finish with flat face. While supplies last. All sales final. ndercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finish under the head. Head Dia 2...

$ 190.52 $ 219,098.00


BC0088

BC0088 - Honda L15B7/L15CA Spring/Titanium Retainer/Keeper Kit

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type BC1070 IN/1089 EX Free Length 2.231" Seat 1.975" @ 58 lbs Open 1.500" @ 154 lbs Coil Bind 1.320" Retainer BC2070 Keepers BC2940 Net Cam Lift 0.490" / 12.45mm

$ 407.55 $ 468.68


BC6301HD

BC6301HD - Toyota 2JZGTE/GE - ProH2K Connecting Rods w/ARP2000 Fasteners, Honda Journal

Toyota 2JZGTE/GE - ProH2K ARP2000 Fasteners, Honda Journal. Made from aerospace grade, 4340 chrom...

Toyota 2JZGTE/GE - ProH2K ARP2000 Fasteners, Honda Journal. Made from aerospace grade, 4340 chromoly steel, BC high performance connecting rods deliver the reliability required to turn up the boost, the nitrous and/or the RPM range. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.590" BE Bore 2.015" BE Width 1.020" PE Bore 0.866" PE Width 1.000" Gram Wt 642 T...

$ 889.38 $ 1,022.79


BC1050-1

BC1050-1 - Valve Spring - Single (Honda/Acura K20A3/K24A) - 1 only

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type Single Free Length 1.879" Seat 1.567" @ 78 lbs Open 1.100" @ 206 lbs Coil Bind 0.972" Retainer BC2050 Spring Seat OEM Net Cam Lift 0.520" / 13.2mm

$ 11.14 $ 12,811.00


BC1040T-1

BC1040T-1 - Valve Spring - Dual (Honda/Acura K20A2/K20A/K24A2/F20C1/F22C1) - 1 only

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. Type Dual Free Length 2.030" Seat 1.590" @ 80 lbs Open 1.020" @ 215 lbs Coil Bind 0.870" Retainer BC2010, BC2011 Spring Seat BC2904 or OEM Net Cam Lift 0.620" / 15.74mm

$ 23.47 $ 26.99


BC8004

BC8004 - Honda H22/H23 Darton M.I.D. Block Sleeves w/Phosphate Coating (87mm to 90mm bore)

Honda H22/H23 - Darton #400-160P M.I.D. Block Sleeves w/Phosphate Coating (87 to 90mm Bore) - 3.4...

Honda H22/H23 - Darton #400-160P M.I.D. Block Sleeves w/Phosphate Coating (87 to 90mm Bore) - 3.415" Semi Bore Size

$ 989.77 $ 1,138.24


BC6052

BC6052 - Honda/Acura K24A - LightWeight Connecting Rods w/ARP2000 Fasteners - Rated to 350WHP

Honda/Acura K24A - LightWeight w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly stee...

Honda/Acura K24A - LightWeight w/ARP2000 Fasteners. Made from aerospace grade, 4340 chromoly steel, BC high performance LW connecting rods deliver the throttle response and the RPM range required for high revs. Every rod is CNC machined, micropolished surface finish treatment, equipped with Aluminum/Silicone/Bronze pin bushings and finish honed to exacting tolerances. C-to-C 5.985" BE Bore 2.008" BE Width 0.780" PE Bore 0.866" PE Width 0.780" Gram Wt 457 Torque Specs 50-55 ft l...

$ 596.15 $ 685.57


BC3044

BC3044 - Honda/Acura K20A2/K20A/K20Z3 Intake Valves (36mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3035

BC3035 - Honda H22/H22A Exhaust Valves (31mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3034

BC3034 - Honda H22/H22A Intake Valves (36mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC3014

BC3014 - Honda/Acura B16A/B18C Intake Valves (34mm / +1mm) - set/8

BC valves are one piece design with a friction welded Stellite tip for the best possible performa...

BC valves are one piece design with a friction welded Stellite tip for the best possible performance. Every valve is made from premium grade, heat resistant stainless steel material to insure reliability with high boost and/or high rpm applications. The undercut stem above the head area not only reduces overall weight for extended rpm potential, but also significantly improves air/fuel flow in and out of the combustion chamber. Every valve is fully machined and features a swirl polished finis...

$ 190.52 $ 219,098.00


BC0040TS

BC0040TS - Honda K20A/K20Z Spring/Steel Retainer/Seat Kit (High Lift)

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, supe...

Designed for high rpm, BC valve springs by PAC Racing are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. WARNING: If running a late model cylinder head (after 2004), you may need to purchase BC2940 keepers to accommodate the BC2010 or BC2011 retainers. Honda changed the keeper groove angles, therefore your stock keepers/locks may not fit the BC retainers properly causing potential damage. T...

$ 401.14 $ 461,311.00